Installation

Installing your LightInSight is quick and easy.

  1. Clean the inside of your windshield in front of the driver, near the top.
    ** Do not use an ammonia-based cleaner **
  2. Wet the inside of the windshield thoroughly with water
  3. Place the smooth side of the LightInSight against the glass, curved side down.
    ** Do not install in your normal field of view **
  4. Carefully push bubbles off of the edges
  5. LightInSight may appear cloudy until all the moisture has evaporated. It will turn perfectly clear in 6-24 hours